Tapered Roller Bearing
1. The vehicle should work within the rated load range. If the vehicle is seriously overloaded, it will directly cause the bearing to overload, which will cause the bearing to fail early, and more seriously, it will cause vehicle failure and personal safety accidents;
2. It is forbidden for the bearing to be subjected to abnormal impact load;
3. Regularly check the use status of the bearing, pay attention to observe whether there are abnormal noises and local sharp temperature rises in the bearing parts;
4. If you want to extend the service life of bearings, it is very important to lubricate them correctly. The correct lubricant depends on environmental conditions, temperature, speed and load. You can completely replace the lubricating oil at least once every six months according to the usage of the vehicle, and carefully check the bearings;
5. You should not expose the bearing to the presence of water for a long time, because it will cause rust and corrosion. It can also cause premature bearing failure, which affects machine performance and productivity. Please make sure to wear gloves when handling bearings, as sweat can also cause rust and corrosion.
Inspection Under Maintenance of the Bearings
Clean the removed bearing with kerosene or gasoline. Then carefully observe whether there is sliding or creeping on the inner and outer cylindrical surfaces of the bearing, whether the inner and outer raceway surfaces of the bearing are peeling, pitting, and whether the rolling elements and cage are worn and deformed. You can judge whether the bearing can continue to be used according to the comprehensive situation of the bearing inspection.
Nicer is the bearing manufacturer, and our main products are standard bearings, such as deep groove ball bearings, tappered roller bearings, cylindrical roller bearings, widely used in electric mortor, speed reducer, pump, etc.
If you want to learn more about our products, please contact us.
评论
发表评论